UVG5 2.0 Head Torch

head torchUSE YOUR HEAD!

When you perform UV Yoke Inspections, do you:

  • A – Pay someone to wave a torch around?
  • B – Struggle and use the magnet and torch yourself?
  • C – Use the Labino UVG5 2.0 Head Torch?

Make life easier.  And safer.  Choose ‘C’. Use the Labino UVG5 2.0 Head Torch.

The UVG5 2.0 is the most durable UV LED headlight in the world.  The beam profile is the largest and smoothest of any UV headlight on the market today.  Depending on the model, the beam diameter is 3-5 inches / 8-12 cm and with intensities that vary from ≈ 4,000 to 80,000 μW/cm2

Select models have been tested to comply with ASTM E3022-18, ROLLS-ROYCE RRES 90061 and AIRBUS AITM6-1001.  The battery run time is 8-14 hours (continuous) depending on the model.  It comes with an acoustic battery indicator that signals the remaining battery time left.

All models can be re-charged fully, within 3 hours, and without removing batteries.

Description

The UVG5 2.0 UV LED head torch is equipped with a white light block filter that is not affected by solarisation, it is IP68 WATERPROOF and is PENETRANT RESISTANT; the first UV LED headlight of its kind.

There are 5 models with three different beam sizes, Floodlight, Midlight and Spotlight.  The Floodlight and the Midlight have two models each, with and without white light.  The UVG5 2.0 Series carries a 2 YEAR WARRANTY.

UVG5 2.0 Floodlight (PN: L131) without white light has an intensity at the centre of ≈ 4,000 μw/cm2, generating a homogeneous beam profile of approximately 5 inches / 12 cm, and is in compliance with ASTM E3022-18, ROLLS-ROYCE RRES 90061, AIRBUS AITM6-1001, The Boeing Company, USAF and PRATT & WHITNEY requirements.

The continuous battery run time for UVG5 2.0 Floodlight 365nm UV is 8 hours.  It does not have white light. This is ideal for Aerospace related users that need to comply with Nadcap related checklists and PRIMES requirements.

UVG5 2.0 Floodlight (PN: L130) with white light has an intensity at the centre of ≈ 4,000 μw/cm2 generating a beam profile of approximately 5 inches / 12 cm, and is in compliance with ASTM E3022-18, ROLLS-ROYCE RRES 90061 and AIRBUS AITM6-1001, THE BOEING COMPANY and PRATT & WHITNEY requirements.

The continuous battery run time for UVG5 2.0 Floodlight 365nm UV is 8 hours.  It also comes with a strong “search” white light for use in dark and tight spaces such as pipes and tanks and can run 5 hours continuously in this mode and generate 1 200 fc (12000 lux). It also has a visual inspection white light mode. This can run for 19 hours continuously, and generate 200 fc (2000 lux).

UVG5 2.0 Midlight (PN: L129) without white light has an intensity at the centre of ≈ 9,000 μw/cm2 generating a beam profile of approximately 4 inches / 9.5 cm, and is in compliance with ASTM E3022-18, USAF and PRATT & WHITNEY requirements.

The continuous battery run time for UVG5 2.0 Midlight 365nm UV is 14 hours. It does not have white light.  Members of the US military should ask for this model.

UVG5 2.0 Midlight (PN: L128) with white light has an intensity at the centre of ≈ 9,000 μw/cm2 generating a beam profile of approximately 4 inches / 9.5 cm and is in compliance with ASTM E3022-18 and PRATT & WHITNEY requirements.

The continuous battery run time for UVG5 2.0 Midlight 365nm UV is 14 hours.  It also comes with a strong “search” white light for use in dark and tight spaces such as pipes and tanks and can run 5 hours continuously in this mode and generate 1 200 fc (12000 lux). It also has a visual inspection white light mode. This can run for 19 hours continuously, and generate 200 fc (2000 lux).

UVG5 2.0 Spotlight (PN: L127) with white light has an intensity at the centre of ≈ 80,000 μw/cm2 (yes, this figure is correct!)

It generates a beam profile of approximately 3 inches / 8 cm and is in compliance with ASTM E3022-18. The continuous battery run time for UVG5 2.0 Spotlight 365nm UV is 8 hours. It also comes with a white light.

If you are looking instead for a UV LED stationery light with fixed installation, please read about GX ORION.  If you are looking for a UV LED handheld light, please read about MB 3.0 SERIES and/or BB 2.0 SERIES. If you are looking for a UV LED flashlight for quick inspections, please read about UVG3 2.0 SERIES.  If you are looking for a UV meter please consider a wireless meter, APOLLO 2.0.

And please don’t forget the unique measurement stand OLYMPOS which brings professionalism and standardization to your team.

The UVG5 2.0 UV LED head torch, MB 3.0 hand lamp, UVG3 2.0 flashlight torch and APOLLO 2.0 UV meter are the main components of the Inspector Kit

Product Selection Guide

The Labino UVG5 2.0 UV LED Head Lamp is ideal for dark and tight spaces like pipes, tanks, and other spaces where the inspector needs to be hands-free. The UV LED features a white light block filter that does not suffer from solarisation.  This Head Lamp can be easily adjusted to three different angles to meet the operator’s needs and features universal style clips to attach to bump caps or hard hats.  An on/off switch located at the back prevents accidental activation and saves battery.  Batteries run for 8 hours, and are charged via a 12V vehicle power socket, wall outlet, or PSU charger.

The UVG5 2.0 UV LED Head Lamp is penetrant resistant and includes a current regulator to provide a homogeneous beam. Three models are available with varying beam profiles and UV intensities.

UVG5 2.0 Spotlight

  • 80,000 μW/cm2 UV intensity
  •  Ø3″ (7 3/5 cm) beam size
  • Extra white light
  • 8 hour battery life
  • Complies with ASTM E3022

 

UVG5 2.0 Midlight

  • 9,000 μW/cm2 UV intensity
  • Ø3 3/4″  (9 1/2 cm) beam size
  • L142 includes extra white light
  • 8 hour battery life
  • Complies with ASTM E3022

 

UVG5 2.0 Floodlight

  • 4,000 μW/cm2 UV intensity
  • Ø4 4/5″ (12 1/2 cm) beam profile
  • L144 includes extra white light
  • 8 hour battery life
  • Complies with ASTM E3022, Airbus AITM6, and Rolls Royce RRES

Specifications

table 2

Features

Battery run time is 8 hours on the Floodlight and Spotlight models and 14 hours on the Midlight models.  It comes with an acoustic battery indicator that signals the battery time left.

All models can be re-charged fully, within 3 hours, without removing batteries.

Three models (Spotlight – L127, Midlight – L128 and Floodlight – L130) come with white light.  There are two different white lights you can operate the UVG5 2.0 LED headlight with,

(a) a strong “search” white light for use in dark and tight spaces such as pipes and tanks which can run 5 hours continuously and generate 1 200 fc (12000 lux) and

(b) a visual inspection white light which can run 19 hours continuously and generate 200 fc (2000 lux).

The Midlight (PN: L129) and Floodlight (PN: L131) are models without white light for organisations that do not allow the use of white light during inspections.

UVG5 2.0 UV LED headlight has been specifically designed to meet the ASTM E3022-18 and ISO 3059-12 standards as well as requirements set by the PRIMES, including but not limited to ROLLS-ROYCE RRES 90061, AIRBUS AITM6-1001, The Boeing Company, USAF and Pratt & Whitney.

Package

UVG5 2.0 UV-A HEADLIGHT: 1 UVG5 2.0 lamp of your choice, 4 Batteries (PN: B115), 1 Charging kit for wall outlet and car cigarette outlet (PN: B200), 1 UV-A Goggles (PN: S505), 1 Power Supply Unit to charge without removing batteries (PN: B328).

package